3/4HP COMPACT MILKER WITH COMPLETE BUCKET

SKU
42001
In stock
Only %1 left
As low as $1,299.00
-
+
Finally a vacuum pump at the right price that is actually sized correctly with teat health and functionally as priorities. For years there has been a handful of under powered systems on the market which are responsible for damaging goats and causing health issues, so we have used our 20 years of experience and expertise in goat milking to bring to market a specially designed pump and milker which surpasses all previously available systems in this category that will milk your goats safely and correctly. Perfect for milking a few goats and the compact size is great for shows.
 
 

Interpuls


Interpuls brand valves perform very well under low vacuum and shut off better in most situations. These are very popular and commonly used in bucket milking applications.

 

Nupulse


The original NuPulse standard milk claw has a pulsator incorporated into the top of the claw eliminating the need for a separate unit, this is particularly helpful in keeping equipment to a minimum when milking smaller herds of goats. The unit can be dissembled and rebuilt completely without tools. There is no shut off on this claw so an inline shut off is required.

 

TopFlow Z


TopFlow was developed for ease of use throughout the entire milking process. Practical design for easy attachment and one of the most popular options available.

 

Stainless Steel Buckets:

• Made from heavy gauge 304 stainless steel.

• Reinforced bottom so it will never wear out.

• Thick, full edge reinforced mouth.

• Better than grade A polish inside and out.

• Single formed pail which means it's made from one piece of stainless so there are no welds to break or leak.                                                         

          

Stainless Bucket Dimensions:

1.5 Gallon (7-3/4" Bottom Dia x 10.5" H  - Weight 7lbs)

35# (11.5" Bottom Dia x 13.75" H  - Weight 11lbs)

55# (12.75" Bottom Dia x 18.5" H  - Weight 13lbs)
65# (13.5" Bottom Dia x 18.5" H - Weight 15lbs)

 

 

Interpuls Eco Buckets:

 

Bucket Dimensions:

50# (14" Bottom Dia x 16.75" H  - Weight 9lbs)
65# (14" Bottom Dia x 19.75" H - Weight 10lbs)

 

NuPulse Bucket Washer:

Optional NuPulse washer is designed to clean your NuPulse cow milker claw and milk hoses with out dis-assembly. When using a Standard NuPulse Cow Milker, the CIP Unit will allow you to wash your milker unit(s) for approximately 2-1/2 minutes with 2 gallons of wash water per CIP Unit. This washer also allows your NuPulse milking claw to remain upright so the pulsator will operate correctly during washing and not fill with water. Included wall mount bracket allows for installation above a wash sink. Requires a hot water source and a vacuum source. 

Features include.
Made in the USA.
Full 1 year warrantee
Rubber feet to eliminate vibration
Only weighs 25 pounds
Built in handle
3/4HP Motor
NO ASSEMBLY REQUIRED


Ships UPS


 Additional Information

 Assembly Instructions

 Repair Information

 Bucket Washer Instructions