2-1/2" Stainless Steel Restrictor Plate Gasket – 1/8" Pilot Hole
The 2-1/2" restrictor plate gasket is a fixed-orifice flow-control component used in compatible dairy pipeline and wash-system applications. Unlike a standard full-open pipeline gasket, this assembly incorporates a 316 stainless-steel restrictor plate with a 1/8" pilot hole to deliberately limit flow through the connection.
By reducing the open passage to a controlled 1/8" orifice, the restrictor creates a predictable restriction in the line. This can be used to help control flow rate, maintain a pressure differential, and balance water or air movement within a properly designed dairy pipeline or clean-in-place system.
Key Features
- Designed for 2-1/2" dairy pipeline connections
- 1/8" fixed pilot hole provides controlled flow through the plate
- 316 stainless-steel restrictor plate
- Creates a fixed restriction without valves or moving parts
- Helps control flow rate and pressure differential in compatible systems
- Can be used in dairy pipeline and wash-system applications where a controlled restriction is required
- Serviceable pipeline component that can be replaced independently
- SKU: 46452
What Does a Restrictor Plate Do?
A standard pipeline connection allows the full inside diameter of the line to remain open. A restrictor plate intentionally reduces that opening. Fluid or air must instead pass through the smaller 1/8" pilot hole, creating resistance to flow and a pressure difference across the plate.
This provides a simple and repeatable way to control movement through a section of pipeline without an adjustable valve. Because there are no moving parts, the restriction remains consistent as long as the pilot opening remains clean and unobstructed.
Use in Dairy Wash & CIP Systems
Controlled restriction can be especially important during clean-in-place washing. Dairy pipeline wash systems rely on the correct relationship between water flow, vacuum, and air admission to produce effective mechanical cleaning action inside the pipeline.
In systems using air injection, restricting flow at the correct location can help control water draw and support the formation of moving wash slugs through the pipeline. The correct amount of restriction depends on the design and size of the individual milking system.
Why the 1/8" Pilot Hole Matters
The pilot hole allows a limited amount of flow through the plate rather than completely blocking the line. The size of this opening determines how restrictive the plate is: increasing the opening allows more flow, while a smaller opening creates greater restriction.
For this reason, the restrictor should be matched to the intended system design rather than treated as a standard pipeline gasket. If you are replacing an existing plate, verify the pipeline size and pilot-hole requirement before ordering or modifying the opening.
Select the Correct Pipeline Size
Restrictor plates are available for several common dairy pipeline sizes. Select the size that matches the connection where the restrictor will be installed.
- 1-1/2" Restrictor Plate Gasket – SKU 46450
- 2" Restrictor Plate Gasket – SKU 46451
- 2-1/2" Restrictor Plate Gasket – SKU 46452
- 3" Restrictor Plate Gasket – SKU 46453
- 4" Restrictor Plate Gasket – SKU 46454
View all Pipeline Gaskets & Clamps »
Need Help Selecting the Correct Restrictor?
Restrictor sizing can affect water flow, air admission, pressure differential, and CIP wash performance. Contact Parts Department at 800-245-8222 for help matching the correct restrictor plate to your pipeline size and wash-system configuration.