1-1/2" Stainless Steel Restrictor Plate Gasket – 1/8" Pilot Hole
The 1-1/2" restrictor plate gasket is a fixed-orifice flow-control component used in compatible dairy pipeline and wash-system applications. Unlike a standard full-open pipeline gasket, this assembly incorporates a 316 stainless-steel restrictor plate with a 1/8" pilot hole to deliberately limit flow through the connection.
By reducing the open passage to a controlled 1/8" orifice, the restrictor creates a predictable restriction in the line. This can be used to help control flow rate, maintain a pressure differential, and balance water or air movement within a properly designed dairy pipeline or clean-in-place system.
Key Features
- Designed for 1-1/2" dairy pipeline connections
- 1/8" fixed pilot hole provides controlled flow through the plate
- 316 stainless-steel restrictor plate
- Creates a fixed restriction without valves or moving parts
- Helps control flow rate and pressure differential in compatible systems
- Suitable for dairy pipeline and CIP wash applications requiring controlled restriction
- Serviceable pipeline component
- SKU: 46450
What Does a Restrictor Plate Do?
A normal pipeline connection leaves the full inside diameter open. A restrictor plate intentionally reduces that passage so liquid or air must move through the much smaller 1/8" pilot opening.
The restriction creates resistance to flow and a pressure difference across the plate, providing a simple way to control movement through a section of pipeline without an adjustable valve or other moving components.
Use in Dairy Wash & CIP Systems
Dairy pipeline cleaning depends on the proper relationship between water volume, vacuum, air admission, and velocity. In systems using air injection, controlled restriction can help regulate water draw and support the formation of moving wash slugs that provide mechanical cleaning action inside the pipeline.
The restrictor should be installed only where called for by the system design. Too much or too little restriction can change the way the wash system operates.
Why the 1/8" Pilot Hole Matters
The pilot hole allows a limited amount of flow through the connection instead of completely blocking it. The opening should remain clean and unobstructed so the restriction remains consistent during operation.
If replacing an existing restrictor, verify both the pipeline size and pilot-hole requirement before ordering or modifying the plate.
Select the Correct Pipeline Size
- 1-1/2" Restrictor Plate Gasket – SKU 46450
- 2" Restrictor Plate Gasket – SKU 46451
- 2-1/2" Restrictor Plate Gasket – SKU 46452
- 3" Restrictor Plate Gasket – SKU 46453
- 4" Restrictor Plate Gasket – SKU 46454
View all Pipeline Gaskets & Clamps »
Need Help Selecting the Correct Restrictor?
Restrictor sizing can affect water flow, air admission, pressure differential, and CIP wash performance. Contact Parts Department at 800-245-8222 for help matching the correct restrictor plate to your pipeline size and wash-system configuration.