REBUILT BOU-MATIC 2000 ON STAND W/5HP MOTOR
Rebuilt Bou-Matic DB-2000 Vacuum Pump on Stand with 5 HP Motor
This rebuilt Bou-Matic DB-2000 vacuum pump assembly provides a more complete replacement option by combining the rebuilt pump head with a 5 HP motor and mounting stand. It is designed for dairy milking systems where replacing the complete pump-and-motor assembly is more practical than installing a pump head alone.
The DB-2000 pump operates at approximately 850 RPM and produces approximately 50 CFM in this 5 HP configuration. The pump head uses a 1-1/4" shaft and flange-style inlet and outlet connections.
Quick Specifications
- Manufacturer: Bou-Matic
- Model: DB-2000
- Motor: 5 HP
- Motor speed: 1800 RPM
- Motor voltage: 230V
- Motor frame: 184T
- Pump speed: 850 RPM
- Approximate pump capacity: 50 CFM
- Pump shaft diameter: 1-1/4"
- Inlet/outlet: Flange connections
- Mounted on stand
- Condition: Professionally rebuilt pump assembly
- SKU: 40205
Professional Pump Rebuild
The vacuum pump head is professionally rebuilt before installation on the stand. The rebuild process includes:
- Rotor clearance checked and reset
- Pump housing honed as needed
- End plates resurfaced
- New vanes installed
- New bearings installed
- New seals installed
- Oiling components serviced as applicable
- Pump tested after rebuilding
Complete Pump-and-Motor Assembly
This configuration is useful when the existing pump, motor, and mounting arrangement all need replacement. If your existing motor and stand are still in good condition, the rebuilt DB-2000 pump head is also available separately.
Related Bou-Matic Vacuum Pump
View all Rebuilt & Used Vacuum Pumps »
Freight Shipping
This pump assembly ships by freight. Freight charges are not included in the standard online shipping calculation. Parts Department will contact you with the freight cost before shipment.
Warranty
The rebuilt vacuum pump includes a 3-month warranty.
Need Help Sizing a Vacuum Pump?
Contact Parts Department at 800-245-8222 for help confirming vacuum-system capacity, electrical requirements, connection style, or replacement compatibility.