REBUILT SURGE 100 ON STAND W/5HP MOTOR & RECLAIMER
Rebuilt Surge 100 Vacuum Pump with 5 HP Motor, Stand & Reclaimer
Professionally rebuilt Surge 100 dairy vacuum pump with a 5 HP motor, mounting stand, and oil reclaimer. This complete rotary-vane vacuum pump package is designed for dairy barns, milking parlors, and pipeline milking systems that require dependable vacuum for daily milking operation.
The Surge 100 is a proven dairy vacuum pump with a serviceable design and readily available replacement parts. This package provides a practical option for replacing an aging vacuum pump while keeping a familiar Surge pump system in service.
Performance Specifications
- Pump: Surge 100
- Motor: 5 HP
- Pump Speed: Approximately 1100 RPM
- Vacuum Capacity: Approximately 50 CFM
- Pump Shaft Diameter: 1-1/8"
- Configuration: Pump and motor mounted on stand
- Oil Management: Oil reclaimer included
- SKU: 40106
Professionally Rebuilt
Parts Department rebuilt vacuum pumps are thoroughly serviced before being offered for sale. Critical wear areas are inspected and corrected to help return the pump to dependable operation in a dairy vacuum system.
- Rotor clearance reset as required
- Pump housing honed
- End plates resurfaced
- New vanes installed
- New bearings installed
- New shaft seals installed
- Oil lines, drippers, and filters replaced where applicable
- Pump tested after rebuilding to verify proper operation
Rebuilt pump assemblies include a 3-month warranty.
5 HP Dairy Vacuum Pump Package
The Surge 100 with a 5 HP motor operates at approximately 1100 RPM and provides approximately 50 CFM of vacuum capacity.
This makes it a practical choice for compatible dairy pipeline and milking parlor systems that require dependable vacuum capacity without moving to a substantially larger pump package.
Final electrical installation should be based on the motor nameplate. Confirm available voltage, phase, circuit protection, and wiring requirements before installation.
Oil Reclaimer Included
An oil reclaimer is included with this pump package to help collect oil discharged through the vacuum-pump exhaust system. This helps keep the pump area cleaner and provides a practical way to manage oil from the lubricated rotary-vane pump.
Reclaimer filters, oil lines, drippers, and related oiling components should be inspected regularly as part of routine vacuum-pump maintenance.
Designed for Dairy Vacuum Systems
The Surge 100 is designed for the continuous vacuum demands of dairy milking equipment. Proper vacuum-pump sizing depends on the complete installation, including the number of milking units, pipeline configuration, reserve requirements, regulators, receivers, and other equipment connected to the vacuum system.
If you are replacing a different pump or changing the capacity of your existing vacuum system, contact Parts Department before ordering so we can help confirm that the Surge 100 is appropriate for your application.
Rebuilt Equipment Note
This is professionally rebuilt Surge equipment. Because rebuilt pumps use serviceable original components, cosmetic appearance may vary from one assembly to another.
Motor brand, paint finish, mounting stand, reclaimer appearance, oiling components, and other non-critical visual details may vary. The important specifications are the Surge 100 pump model, 5 HP motor rating, approximately 50 CFM capacity, and included operating components described in this listing.
Related Surge 100 Service Parts
Parts Department carries replacement components for maintaining and servicing Surge 100 vacuum pumps.
- Vanes for Surge 60/75/100 Vacuum Pumps – 4/Set – SKU 948197
- Double-Row Bearing for Surge 40/60/75/100 – SKU 90008
- Needle Bearing Race for Surge 40/60/75/100 – SKU 05450
- 2" Vacuum Pump Oil Reclaimer – Up to 10 HP – SKU 63247
View all Westfalia & Surge Vacuum Pump Parts »
Other Surge Vacuum Pump Options
Parts Department also offers other rebuilt Surge vacuum-pump configurations for dairies that require different capacities or package options.
- Rebuilt Surge 75 with 5 HP Motor, Stand & Reclaimer
- Rebuilt Surge 100 Pump Head with Oiler, Filter & Reclaimer
- Rebuilt Westfalia Surge RPS2800 with 5 HP Motor
Need Help Sizing Your Vacuum Pump?
Contact Parts Department at 800-245-8222 for assistance with Surge vacuum pumps, replacement parts, or dairy vacuum-system sizing. If you are replacing an existing pump, having the current pump model, motor horsepower, shaft size, and a photo of the installation available can help us confirm the correct replacement.