285 GALLON MILKPLAN COOLING TANK 240V

SKU:
MP285
$12,495.00
Current Stock:
Adding to cart… The item has been added

MilkPlan MP285 285-Gallon Milk Cooling Tank

The MilkPlan MP285 is a self-contained milk cooling tank designed for dairies, farmstead cheesemakers, goat dairies, and other milk-handling operations that need reliable cooling and programmable agitation. Its refrigeration and agitation systems work together to rapidly cool fresh milk and maintain a consistent temperature throughout the tank.

The MP285 provides dependable cooling capacity for growing dairy and farmstead processing operations. It requires 240V electrical service; final wiring and circuit protection should be confirmed by a qualified electrician.

285-gallon milk cooling with 240V operationA practical solution for dairy, goat dairy, and farmstead cheese-production operations.

MP285 Quick Specifications

ModelMP285
Operating Range43–286 Gallons
Electrical Supply240V
Tank Width43 Inches
Features and Benefits
  • Self-contained refrigeration system for straightforward installation
  • Sloped stainless-steel tank bottom promotes complete draining
  • Adjustable leveling feet help stabilize the tank on uneven floors
  • Programmable agitation duration and cycle intervals
  • Manual agitation mode for mixing newly added fresh milk
  • Lid safety switch stops the agitator when the main lid is opened
  • Factory-programmed with commonly used operating parameters
  • Separate 7-inch milk inlet with its own removable cover
  • Fresh milk can be added without opening the main tank lid
  • Milk inlet accommodates a strainer for filtering incoming milk
Capacity and Recommended Use
Nominal Size285 Gallons
Maximum Capacity286 Gallons
Minimum Operating Capacity43 Gallons
Estimated Herd Size24 Cows or 150 Goats

Herd-size estimates are approximate. Actual milk volume will vary by breed, animal, stage of lactation, milking frequency, and production level.

Grade A and Sanitary Design

The MilkPlan MP285 is manufactured for sanitary dairy applications and features stainless-steel product-contact surfaces, a covered milk inlet, a sloped tank bottom, and sanitary outlet components.

The tank is supplied with a Grade A sanitary butterfly valve, end cap, gasket, and clamp for the milk outlet.

Dimensions and Installation Clearances

All measurements are shown in inches. The lettered headings correspond directly to the dimensional drawing below.

MilkPlan horizontal cooling tank dimension diagram

Tank Size A A1 A2 B B1 H H1 H2 H3 H4
112-Gallon 63.0" 37.4" — 42.9" 26.4" 56.9" 41.3" 32.7" 27.0" 7.1"
140-Gallon 63.0" 37.4" — 42.9" 26.4" 63.8" 46.9" 38.0" 26.8" 7.1"
170-Gallon 63.0" 37.4" — 42.9" 26.4" 69.5" 53.0" 44.1" 29.5" 7.1"
220-Gallon 69.7" 51.6" — 50.8" 36.4" 75.2" 49.8" 40.9" 27.0" 7.6"
285-Gallon THIS MODEL 80.7" 52.0" 17.7" 58.9" 35.8" 75.8" 49.2" 39.8" 33.1" 7.6"
330-Gallon 80.7" 52.0" 17.7" 58.9" 37.0" 82.3" 58.9" 45.3" 33.1" 7.6"
400-Gallon 89.6" 61.4" 23.2" 58.9" 44.9" 86.6" 64.8" 51.3" 32.2" 7.6"
525-Gallon 91.3" 58.7" 26.8" 72.4" 44.5" 86.6" 59.4" 47.2" 34.6" 7.6"

Dimension Key

A Maximum overall tank length
A1 Main tank length
A2 Refrigeration-section length
B Overall tank width
B1 Inner support / leg width
H Maximum overall height with the tank lid open
H1 Overall height with the lid closed
H2 Height to the top of the tank body
H3 Height of the refrigeration unit
H4 Floor clearance / leg height
Allow sufficient space above and around the tank for the lid to open completely. For the MP285, maximum open-lid height is approximately 75.8 inches. Verify doorway dimensions, floor space, electrical access, ventilation, and service clearances before delivery.
What Is Included
  • MilkPlan MP285 285-gallon stainless-steel cooling tank
  • Self-contained refrigeration system
  • Programmable agitation system
  • Grade A sanitary butterfly valve
  • Valve end cap
  • Sanitary gaskets and clamps
  • Stainless-steel dipstick
  • Tank calibration chart
  • Two-year manufacturer warranty
  • Lifetime telephone technical support from Parts Department
Electrical and Installation Information

The MP285 operates on 240V power. Electrical service, circuit protection, disconnects, and wiring should be sized and installed by a qualified electrician in accordance with the equipment nameplate and applicable electrical codes.

Place the tank on a solid, level surface with adequate ventilation around the refrigeration unit. The adjustable feet can be used to level the tank and support proper drainage.

Electrical work should be completed by a qualified electrician. Confirm final installation requirements before connecting or operating the tank.

Questions Before Ordering?

Contact Parts Department for assistance at 800-245-8222