CLASSIC FLOW STAR BOWL VENTED

SKU:
62007-2
$36.95
Current Stock:
Adding to cart… The item has been added

Classic Low-Profile Flo-Star Bowl – Vented – 2" High

This Classic Low-Profile Flo-Star replacement bowl is the vented version for compatible Bou-Matic Flo-Star-style milking claws. The Classic bowl is approximately 2" high, making it noticeably shorter than the 2-1/2" Standard high-profile bowl.

For accurate replacement, identify the bowl by its physical features rather than the model name alone. The Classic uses the low-profile 2" bowl and a square upper gasket; the Standard uses a taller 2-1/2" bowl and a round upper gasket.

IMPORTANT – THIS IS THE LOW-PROFILE BOWL

Classic = LOW PROFILE. This bowl is approximately 2" high and uses a SQUARE upper gasket. If your existing bowl is 2-1/2" high with a round upper gasket, order the Standard high-profile bowl instead.

Key Features

  • Style: Classic / Low Profile
  • Bowl height: approximately 2"
  • Vent configuration: Vented
  • Uses a square upper gasket
  • Aftermarket replacement for compatible Flo-Star-style claws
  • Low-profile design
  • Transparent construction for easy milk-flow visibility
  • Parts Department replacement component
  • SKU: 62007-2

How to Identify the Classic Low-Profile Bowl

Profile Classic / Low Profile
Bowl Height Approximately 2"
Upper Seal Shape Square
Complete Claw Family Capacity Approximately 19 cu. in. / 310cc
This Bowl Vented

Vented or Non-Vented?

This is the vented Classic low-profile bowl. Compare it with the bowl being replaced and match the existing vent configuration.

If your Classic bowl is non-vented, use the 62007-1 Classic Low-Profile Non-Vented Bowl.

Classic vs. Standard Flo-Star Bowls

  • Classic / Low Profile: 2" high with square upper gasket
  • Standard / High Profile: 2-1/2" high with round upper gasket

If the bowl being replaced is approximately 2-1/2" high, select one of the Standard bowls rather than this Classic version.

Related Flo-Star Parts

View all Flo-Star Claw Parts »

Not Sure Which Bowl to Order?

Measure the height of your existing bowl and check the upper seal shape before ordering. Classic = 2" low profile with square seal. Standard = 2-1/2" high profile with round seal. Contact Parts Department at 800-245-8222 if you need help identifying the correct replacement.