VANES FOR MASPORT M7.5 4/SET

Vanes for Masport M7.5 — Set of 4

Restore strong, reliable vacuum with this set of 4 replacement vanes for the Masport M7.5 vacuum pump. New vanes help recover performance, reduce noise, and protect internal pump components from excessive wear.

Key Features

• Direct fit: engineered for the Masport M7.5 (4-vane) pump
• Matched set of four: replace all vanes at once for even wear and best results
• Smoother operation: supports stable vacuum and quieter running
• Durable materials: built for long service life in demanding conditions

When to Replace

• Loss of vacuum or slower recovery time
• Increased pump noise or vibration
• Vanes show chips, cracks, glazing, or are below service thickness

What’s Included

• 4 × vanes — complete set for one Masport M7.5 pump (2-1/2" Wide X 8-1/2" Long)

Install Tips

• Disconnect power and allow the pump to cool before service
• Clean rotor slots and housing thoroughly before inserting new vanes
• Inspect end plates and seals; replace gaskets if worn or scored
• Run-in per your maintenance manual, then verify operating vacuum

Spare Parts

• Bearing — Masport M7-5
• Oil Seal — Masport M7-5
• Masport 003 Gasket — M7-5
• Masport 002 Gasket — M7-5
• Endplate Gasket — M7-5
• 2" Reclaimer (up to 10 HP)

Fit note: These vanes are for the Masport M7.5. If you’re unsure of your pump model or vane dimensions, check the pump ID tag or your parts book and we’ll help confirm compatibility.